Minidock PA61

Practical, easy to install, safe and saving a considerable amount of space. Since its launch, the Inkema Minidock has been a huge success. It is a fast, easy option for installing in any loading bay thanks to its size and the fact that it requires no installation pit. Despite its small size, it can support up to 6.000 kg dynamic load in loading and unloading operations. 

The Minidock is supplied with a special coating for corrosive atmospheres. 

Inkema Minidock is comprised of the following elements:

• Platform with an upper sheet of tear plate with a thickness of 6/8 mm and solid profiles. 

• A lip made of tear plate with a thickness of 13/15 mm. 

• A fixed part that acts as a handrail and is welded to the bay sub-frame in order to increase safety when loading and unloading goods.

Its inner mechanism allows the operator to open it with almost no effort. All that has to be done is inserting the lever into the opening of the moving part and pull it until the Minidock is completely vertical. Then push the lever until the lip is resting on the truck.

To remove the Minidock after loading/unloading, pull the lever backwards without raising it entirely and place it on the lowering stops.

Reduce the size without giving up other features.

1. Steel lever for operating the lip manually.
2. Rubber bumpers at each end (optional).
3. Lip folded and milled at the end, in order to better adjust to the lorry and to make it smoother for forklifts.
4. Axles protected from corrosion by electrolytic zinc plating treatment and passivation.

Different bumpers are available, as an option, to be installed at the ends. 

Its tear plate surface prevents from slipping. 

The lip is folded at the end, to allow it to correctly fit on the truck and it is milled at its outer end to ease the passage of the forklifts while loading and unloading goods.